Unable to find a starting operating point
after 500 iterations. For example, check the
following devices:
X$Q2.X1_BASE.QQ1, X$U3.QT1, X$U3.QT2, X$U3.!DISense
X$U3.!DOSC, X$U3.!DSRFF, X$U3.!D_OUT, X1.!D_CYCLE
Raising the DEVICE_OP_ITRMAX option from the
current value of 500 might also help.
仿真的时候command shell里面提示错误。我用了一个UC3843。
我猜大概是哪个参数要调整。但不知道在哪里操作。求助
|